The knowledge of aluminum alloy manganese agent is revealed
With the rapid development of society and economy, a variety of different materials are used in the construction of many large-scale projects. Among them, aluminum products are widely used. Generally, there are many things that require special attention in the process of aluminum production. The addition of aluminum alloy manganese element can greatly improve the performance advantages of the product, adjust the content of manganese in different grades of aluminum alloy, and smelt it into an aluminum master alloy. So, do you know the relevant knowledge of aluminum alloy manganese agent? What is the use method of this aluminum alloy manganese agent? What are the characteristics of aluminum alloy manganese?
When many enterprises produce alloy products, they will add aluminum alloy manganese agent. You can directly sprinkle it evenly in the aluminum molten pool, and carry out slag removal according to the actual production requirements of the enterprise. It is enough to manually stir it to make it large. For large-scale diffusion, the required additive dosage can be calculated according to the actual yield of 90%.
The characteristics of the whole aluminum alloy manganese agent are obvious. The element content reaches 75%. When aluminum products are smelted, various additives are added. The aluminum alloy manganese agent is made of highly active metal powder, mixed with a fluxing agent. Solvent for drying, mixing, and pressure molding. The characteristics of this product are relatively obvious, the density is relatively large, and the reaction speed is relatively fast. When making aluminum master alloys, aluminum alloy manganese can be added to increase its hardness and increase its stability.
What do you guys have about aluminum alloy manganese additives, should you understand it clearly? When we produce aluminum intermediate products, we can add aluminum alloy manganese agent element to its performance advantages. The method of use is relatively simple. It must be fully stirred and then stand, slag off, and then sprinkle into the aluminum liquid. Generally, the amount of aluminum alloy manganese agent is about 0.3% of the weight of the aluminum liquid. It can be packed in corrugated boxes when packaging. You can dry the aluminum alloy manganese agent and store it. It is very important to keep the storage environment dry.
